Table of Contents
Advertisement
Numbered Messages
Cl
Type port password
Meaning: The port to which the display tenninal is connected has a password
defined for it in the configuration definition.
Action: Type the password for this port, and press the ENTER key. In this mode,
use the period, the carriage return, or a defined line turnaround character as the
ENTER key.
C2
Type the number of the terminal:
Meaning: The port you are logging on to was defined for protocol conversion. To
communicate correctly with your tenninal, the 3708 must know the tenninal type.
Action: Find the name of the tenninal in the list on the screen. The number next to
that name identifies the tenninal to the 3708. Type the number that identifies the
terminal, and press the ENTER key. In this mode, use the period, carriage return,
or a defined line turnaround character as the ENTER key.
If the name of the terminal is not on the list, the terminal may be user-defined.
Check with the planner or check the configuration fonns to find which number to
enter.
C3
Type the number of the desired connection:
Meaning: The terminal is now connected to the 3708, and you can connect to a
host application or operate the tenninal as the control terminal.
Action: Type the letter C, and press the ENTER key to operate the tenninal as the
control terminal or type the number that corresponds to the host to which you want
to log on, then press the ENTER key. In this mode, use the period, carriage return,
or a defined line turnaround character as the ENTER key.
C4
You can now type your system logon
Meaning: You are now connected to the host system.
Action: Type in the required host logon sequence to gain access to the host
application.
C5
Type control terminal password
Meaning: You must enter a password that is assigned by the planner or system
administrator to begin a cOQtrol tenninal session. A control tenninal password is up
to eight characters in length and must not include spaces, a period (.), or four
#
symbols.
Action: Type the control tenninal password and press the ENTER key. In this
mode, use the period, carriage return, or a defined line turnaround character as the
ENTER key.
Appendix F. 3708 Control Terminal Messages
F-3
Advertisement
Table of Contents
