IBM 3708 Planning And Installation page 247

Network conversion unit
Hide thumbs Also See for 3708:
Table of Contents

Advertisement

CIOO
PORT DATA MONITOR FAILED
Meaning: The device being monitored was disconnected on command from the host
or because of a line drop condition, such as the device being turned off. The control
terminal does not display any more data.
Action: Follow the instructions shown on the screen. You can try this function
again after determining the cause of the problem.
CIOI
CONTROL TERMINAL PASSWORD VERIFICATION FAILED. UPDATE NOT DONE
Meaning: You tried to change the control terminal password but did not type the
same characters for verification that you typed for the new password. The control
terminal password was not changed.
Action: Try the task again.
CI02
A PASSWORD IS REQUIRED FOR CONTROL TERMINAL ACCESS
Meaning: You tried to change the control terminal password but entered blanks in
the new password field. The control terminal password cannot be all blanks.
Action: Try the task again. Enter a password that does not contain blanks, that
does not begin with a blank, and that does not contain imbedded blanks. The
password also must not contain a period (.) or four
#
symbols.
CI03
UPDATE FAILED
Meaning: You entered some data that was accepted, but the 3708 could not write
the data to nonvolatile storage (EEPROM). The update is not in effect.
Action: Display the alert log. Write down the alert ID (Axxx) and the failure codes
from the alert screen. Keep the error information available for future service needs.
See IBM 3708 Network Conversion Unit Problem Determination for descriptions of
the display alerts.
CI04
DATA MONITOR NOT ALLOWED ON CONTROL TERMINAL PORT
Meaning: You tried to use the port data monitoring function for the port to which
the control terminal is connected. This function is not allowed on the control
terminal port.
Action: If you must monitor that port:
1. Terminate the control terminal session.
2. Go to another terminal and begin a control terminal session on that terminal
3. Select the port data monitor function for the original port; otherwise, specify a
different port.
F -4
3708 Planning
and Installation

Advertisement

Table of Contents
loading

Table of Contents