Connecting An External Display - SMART Board 6000S Series Installation And Maintenance Manual

Chapter 3
Connecting computers and other devices
NOTE
If a SMART OPS PC module is installed in the accessory slot, you can
connect USB drives, peripherals, and other devices to the USB 2.0
Type-A, USB 3.0 Type-B, and USB Type-C receptacles on the OPS
PC module to access those devices from the OPS PC module input.

Connecting an external display

You can connect an external display using the HDMI 2.0 out connector on the
connector panel (pictured). The external display will show the same image. This
is useful when you're using the display in an auditorium or other large space
where it would be beneficial to have a second display.
IMPORTANT
If the connected external display doesn't support HDCP, the image on the external display is limited to
480p resolution. For full resolution output, connect a display that supports HDCP.
smarttech.com/kb/171414 37