System Settings; Navigation To The Settings Menu; Helm And Device Locations - Mercury VesselView Link Operation Manual

Section 4 - Setup and Calibrations

System Settings

Navigation to the Settings Menu

Changes in any of the settings can be made at any time using the Settings menu. All drop‑down and flyout menus can be
navigated by touching the screen or by using the rotary knob.
The Settings menu can be found by swiping downward from off the screen onto the upper portion of the screen. This will bring
up the System Controls window. Select the Settings tile. A menu will appear on the left portion of the screen. Select Mercury
from the list of options. The window of VesselView settings controlled by the Mercury side of the MFD will appear.

Helm and Device Locations

Within the System Settings the operator can define the location and the number of the VesselView device. This is important
when there are multiple VesselViews installed on a vessel. Assigning unique helm locations and device numbers prevents
communication errors over the control network.
Page 72
61655
61656
90-8M0109374 JUNE 2016
eng