Figure 3. Connecting The Six-Conductor Ribbon Cable To The Serial Or Usb Smart Cable; Figure 4. Debug Connector J1 - ZiLOG eZ80AcclaimPlus! User Manual

eZ80AcclaimPlus! Development Kit
User Manual
8
1. Connect one end of the 6-circuit ribbon cable provided in your Kit to the USB Smart

Figure 3. Connecting the Six-Conductor Ribbon Cable to the Serial or USB Smart Cable

2. Connect the other end of the ribbon cable to Debug Connector J1 on the Development
The eZ80AcclaimPlus! Development Kit
Cable unit, ensuring that the ribbon's male connector is aligned correctly with the
female connector on the unit, as indicated by the red stripe in Figure 3.
Board. Ensure that Pin 1 on the ribbon cable is aligned with Pin 1 on the target con-
nector, as highlighted in Figure 4.

Figure 4. Debug Connector J1

UM024401-0412