Connecting The Ez80Acclaimplus! Development Board To Your Pc; Figure 2. A Successful Usb-To-Uart Driver Installation - ZiLOG eZ80AcclaimPlus! User Manual

5. If the driver installation was successful, the Ports (COM & LPT) section of the Device Man-
ager will display USB Serial Port (COMx) or similar message, as highlighted in Figure 2.

Figure 2. A Successful USB-to-UART Driver Installation

Note: To launch the Device Manager on Windows 7 systems, launch the Start menu, enter device
manager in the Search programs and files field, and press the Enter key.

To open the Device manager on earlier Windows systems, navigate via the following path:

→
Start
Connecting the eZ80AcclaimPlus! Development Board to
your PC
Observe the following procedure to connect the eZ80AcclaimPlus! Board to your PC.
Caution: Disconnect or turn off the power to the eZ80AcclaimPlus! Development Board before
connecting or disconnecting the USB Smart Cable.
UM024401-0412
→
Control Panel System
eZ80AcclaimPlus! Development Kit
→ →
Hardware Device Manager
Connecting the eZ80AcclaimPlus! Development
User Manual
→
Ports (COM& LPT)
7