Installing The Usb Smart Cable Driver; Windows 7 32/64 Systems - ZiLOG eZ80AcclaimPlus! User Manual

eZ80AcclaimPlus! Development Kit
User Manual
4
1. Insert the ZDS II disc into the CD-ROM drive. The DemoShield installation applica-
2. In the DemoShield main menu, click the

Installing the USB Smart Cable Driver

The USB Smart Cable can be installed on PCs that run on Windows 7 (32- and 64-bit),
Windows Vista (32- and 64-bit) and Windows XP operating systems. The procedures in
this section will guide you through the USB Smart Cable installation process.

Windows 7 32/64 Systems

Observe the following steps to install the USB Smart Cable on a Windows 7 system.
1. Connect the USB Smart Cable to a USB port on your development PC. When the PC
2. Windows automatically searches for the driver; this process can take a few moments.
3. From the
4. From this search list, click
5. In the submenu that appears, click
6. In the
7. Click the
The eZ80AcclaimPlus! Development Kit
tion should launch automatically. If DemoShield does not launch automatically, open
Windows Explorer, browse to your CD-ROM drive, and double-click the
executable file to launch the DemoShield installer.
launch.exe
products to install, you can choose to install only ZDS II or to install both ZDS II and
all associated documentation. As an option, you can also copy the documentation
directly from your CD-ROM drive to your hard disk.
detects the new hardware, it will display the Installing device driver software dialog.
Because there is no option to terminate this search process, wait for the search to complete.
If the driver was previously installed, Windows will automatically install the USB
Smart Cable driver. If this is the case, skip ahead to
driver, close the search dialog and proceed to the next step.
Start menu, navigate via the
in the Search field to cause the Device Manager to appear in a list of
Device Manager
search results.
which presents a list of devices that operate on your PC. Find
to view a sublist of additional devices, and right-click your mouse on
Cable .
Update Driver Software – USB Smart Cable
Browse my computer for driver Software
button to browse to one of the following driver directories,
Browse...
depending on the throughput of your PC.
On 32-bit Windows 7 systems, navigate to:
Install Products
Search Programs and files
to open the Device Manager dialog,
Device Manager
Update Driver Software...
option.
button. From the list of
Step 9. If Windows cannot find the
menu, and enter
Other devices
USB Smart
.
dialog that appears, click the
UM024401-0412
, toggle it