Figure 16. Powerware Hot Sync Can Bridge Card - Eaton 9155 User Manual

Parallel UPS System Installation

Figure 16. Powerware Hot Sync CAN Bridge Card

To install the Powerware Hot Sync CAN Bridge Card:
1. Remove the front covers of all cabinets, starting with the top cabinet.
Press and release the handle latch at the bottom of each cover and then lift the cover up and off the
cabinet (see
Figure 17. Removing the Front Covers
30 Eaton 9155 Parallel UPS (8–15 kVA) User's Guide 164201592—Rev E0
Figure 17).
Plug-in Terminal Block