Table of Contents
Advertisement
C C h h a a p p t t e e r r 2 2 S S a a f f e e t t y y W W a a r r n n i i n n g g s s
This manual contains important instructions that you should follow during installation and maintenance of the
UPS and batteries. Please read all instructions before operating the equipment and save this manual for future
reference.
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE
PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
•
This UPS contains its own energy source (batteries). The UPS output may carry live voltage even when the
UPS is not connected to an AC supply.
•
To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity controlled, indoor
environment, free of conductive contaminants. Ambient temperature must not exceed 40°C (104°F). Do
not operate near water or excessive humidity (95% maximum).
•
To reduce the risk of fire, connect only to a circuit provided with 100 amperes maximum branch circuit
overcurrent protection in accordance with the National Electrical Code
•
Output overcurrent protection and disconnect switch must be provided by others.
•
Batteries can present a risk of electrical shock or burn from high short circuit current. Observe proper
precautions. Servicing should be performed by qualified service personnel knowledgeable of batteries and
required precautions. Keep unauthorized personnel away from batteries.
•
Proper disposal of batteries is required. Refer to your local codes for disposal requirements.
•
Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
Eaton 9155 Parallel UPS (8–15 kVA) User's Guide 164201592—Rev E0
DANGER
WARNING
®
(NEC
CAUTION
®
), ANSI/NFPA 70.
5
Advertisement
Table of Contents
