Figure 57. Powerware Hot Sync Can Bridge Card - Eaton Power Xpert 9395 Installation And Operation Manual
Hide thumbs
Also See for Power Xpert 9395:
- Installation and operation manual (239 pages) ,
- User and installation manual (159 pages) ,
- Installation manual (56 pages)
Table of Contents
Advertisement
Installing Options and Accessories
Figure 57. Powerware Hot Sync CAN Bridge Card.
NOTE
To install the card:
1.
Verify the UPS system is turned off and all power sources are removed. See
Chapter 7 UPS Operating Instructions
2.
Unfasten the front door latch and swing the door open (see
3.
Install the Powerware Hot Sync CAN Bridge Card into an open X-Slot communication bay on the front of
the UPS. See
To locate the appropriate terminals on the Powerware Hot Sync CAN Bridge Card, see
Table
25.
98
Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201725—Rev 15
Only one Powerware Hot Sync CAN Bridge Card can be installed in the UPS. Multiple
CAN cards are not supported and will cause system conflicts.
for shutdown instructions.
Figure 45
and
Figure 51
for X-Slot communication bay locations.
Plug-in Terminal
Block J3
Figure
22).
Figure 58
and
Advertisement
Table of Contents
