INSTALLING OPTIONS
Powerware Hot Sync CAN Bridge Card
42
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide
The Powerware Hot Sync CAN Bridge Card, shown in Figure 34, can be
installed to provide connectivity for operational mode control and
metering of a parallel system at any UPS in the system.
Figure 34. Powerware Hot Sync
To install the Powerware Hot Sync CAN Bridge Card:
1.
Remove the front covers of all cabinets, starting with the top
cabinet.
Press and release the handle latch at the bottom of each cover and
then lift the cover up and off the cabinet (see Figure 35).
Figure 35. Removing the Front Covers
CAN Bridge Card
®
S
164201601 Rev D www.eaton.com/powerquality
Plug-In Terminal Block