Recall Saved Settings - RGBlink VENUS X1 Manual

3.18 Recall Saved Settings

VENUS X1 provides 36 positions for saving or recording parameters. To recall saved settings:
1. Push the [LOAD/6] button, the button light is on, and enable the LOAD function:
2. Turn the rotary knob, and select the position that will load, push the knob to confirm.
3. Push the [LOAD/6] button again, the button light is off, and disable the LOAD function.
RECALL SAVE
->SAVE 1
Button on is ready for recall
Button flashes means just recall
52