Recall Saved Settings - RGBlink M2 Quick Start Manual

Recall Saved Settings

M2 provides 36 positions for saving or recording parameters. To recall saved settings:
1. Push the [LOAD] button in Stored Presets Area, the button [LOAD] and [PAGE] lights are lit, and some of
buttons 1~6 are lit and some are flashing. The button lit is ready for recall and flash means just recall, push
the button lit to recall.
2. Select PAGE, for example, the button [2] is lit, push the button [2].
3. After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the button [2]:
4. Push the [LOAD] button again, the button light is off, and exit the load function.
5. Select <Load From UDisk>, user can load the saved parameters from the UDisk.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
LOAD FROM
->PAGE: 1
BANK: 1
Load From UDisk
LOAD FROM
->PAGE: 2
BANK: 1
Load From UDisk
LOAD FROM
PAGE: 2
->BANK: 2
Load From UDisk
support@rgblink.com
No UDisk
No UDisk
No UDisk
26
| www.rgblink.com
26 / 28