Recall Saved Settings - RGBlink M1 Quick Start Manual

Recall Saved Settings

M1 provides 25 positions for saving or recording parameters. To recall saved settings:
1. Push the [LOAD] button in Presets operation area, the button [LOAD] and [PAGE] lights are lit, and some of
buttons 1~5 are lit and some are flashing. The button lit is ready for recall and flash means just recall, push
the button lit to recall.
2. Select PAGE, for example, the button [2] is lit, push the button [2].
3. After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the button [2]:
4. Push the [LOAD] button again, the button light is off, and exit the load function.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
LOAD FROM
->PAGE: 1
BANK: 1
LOAD FROM
->PAGE: 2
BANK: 1
LOAD FROM
PAGE: 2
->BANK: 2
20
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn