RGBlink VENUS X1 Manual page 56

(4) Ethernet setting
When select "ON", it will show IP address, subnet mask and gateway.
->NETWORK
->GATEWAY
① One LAN environment
Set the <IP ADDRESS>, be sure set the same IP address for VENUS X1 and router.
System default the IP address is 192.168.0.100.
->192.168.000.100
② Multiple routers
Be sure the router that connect to VENUS X1 is connected to the other routers.
Set the <IP ADDRESS> and <SUBNET MASK>, check the IP address of the wireless router, and
make sure it is same with the other four IP address that it connect.
The VENUS X1 will automatically save all the network parameters, it will not be cleared even
factory reset.
3. APP connection
(1) Download and install the APP
XPOSE APP supports IOS and Android system.
IOS: Open the APP STORE and search "XPOSE" or "RGBlink", and download it.
Android: Open the official Android market and search "XPOSE" or "RGBlink", and download it.
After download, it will show the shortcut icon
(2) Open the APP for operation (Take IOS for example, and same with Android)
Make sure the mobile terminal equipped with APP is connected to the LAN wireless router.
Open the APP "XPOSE" and click "Search Device", choose "VENUS X1".
Chapter 4: Controlling Your Processor Remotely
DHCP
IP ADDRESS
SUBNET MASK
IP ADDRESS
ON
>>
>>
>>
>>
.
55