Led Management Menu - RGBlink VENUS X1 Manual

SN Display the serial number of the device.
VERSION Display the software and hardware version of the device.
TECH SUPPORT Display sales, after-sale service, email, website and telephone.
Display the date, time, current time, last time, total time and boot times.
DATE&TIME
User can also change the date and time.
Enable or disable the network function. If select "ON", user can set the IP
ETHERNET
address, subnet mask and gateway.
LOCK FRONT Lock front panel function. If the key is locked, the equipment will remind:
PANEL "Buttons are locked! Press MENU button for 5s unlock button!"
The device will not work if excess the prescribed time, there are no signal
LICENSE SETUP output, it needs to input password and modify the using time to continue
to work.
User can enable or disable the hot backup function. Select "ON" to set the
HOT BACKUP backup signal for BACKUP_1 to BACKUP_5. It will switch to the
backup signal if interrupt signal.
DEVICE STATUS Display the video status, MB status and EXT status.
User defines BLACK and SCALE button.
USER DEFINES BLACK: Default black function, can define this button as FREEZE, TEST
BUTTON PATTERN and BRIGHT.
SCALE: Default scale function, can defines this button as TAKE.
OLED OLED luminance adjust, the adjustment range is 1~15.
LUMINANCE
FAN CONTROL Enable or disable the auto speed function, set the current speed and view
the current temperature.

3.3.8 LED MANAGEMENT Menu

QUICK SENDING CARD TYPE
CONNECTIO Support 3 kinds of sender card, LINSN TS 802, NOVA STAR MSD 300 and
->DEVICE STATUS
USER DEFINES BUTTON
OLED LUMINANCE
FAN CONTROL
->QUICK CONNECTION
ADVANCED
>>
>>
12
>>
>>
>>
24