Recall Saved Settings - RGBlink CP 3072PRO User Manual

3.13 Recall Saved Settings

CP 3072PRO provides 36 positions for saving or recording parameters. To recall saved settings:
1. Push the [LOAD] button in Stored Presets Area, the button [LOAD] and [PAGE] lights are lit, and
some of buttons 1~6 are lit and some are flashing. The button lit is ready for recall and flash
means just recall, push the button lit to recall.
->PAGE: 1
2. Select PAGE, for example, the button [2] is lit, push the button [2].
->PAGE: 2
3. After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the
button [2]:
->BANK: 2
4. Push the [LOAD] button again, the button light is off, and exit the load function.
5. Select <Load From UDisk>, user can load the saved parameters from the UDisk.
CP 3072PRO
LOAD FROM
BANK: 1
Load From UDisk
LOAD FROM
BANK: 1
Load From UDisk
LOAD FROM
PAGE: 2
Load From UDisk
User Manual
Chapter 3 : Using Your Product
No UDisk
No UDisk
No UDisk
40