Back Panel - RGBlink VENUS X1 Manual

1.2.1 Back Panel

Input Connectors
HDMI-A – HDMI
10
Standard HDMI signals can input.
BNC - CVBS
11
Standard CVBS signals can input.
DB15 – VGA
12 Standard VGA signals can input. Additionally this VGA port supports Component
(YPbPr) with the use of a VGA to Component adapter.
DVI-I – DVI
13 Standard DVI signals can input.
The DVI port supports up to HDMI 1.3 if the port format is set to HDMI.
Output Connectors
DVI-I – DVI
14. 15 Connect to the monitor or LED display which has DVI interface. (This connector does
not support hotplug).
DVI-I – DVI LOOP
14
Connect to the DVI input of the next VENUS X1 or the device with DVI input.
DB15 – VGA
16 Connect to the monitor or LED display which has VGA interface. (This connector does
not support hotplug).
Control Connectors
DIP Switch
If the two DIP switches are upwards, the device is in normal work, and if they are
4
downwards, the device is in upgrade state. OLED module light is off when the device is
in upgrade state. Some of the button lights turn on, and the device will not work.
RJ45 – Ethernet
5
Connect to Ethernet work for remote control by windows software.
USB-B – USB
6 Connect to Ethernet work for remote control by Windows software and for product
firmware upgrades.
8