Software Upgrade - RGBlink VENUS X1 Manual

Chapter 7: Appendix

7.2 Software Upgrade

The upgrade steps are as follows:
1. Connect the USB interface of VENUS X1 to the computer with a USB cable.
2. Plug in the power cord, and make sure the device is in normal operation.
3. Open XTOOL. Icon like Click "语言/Language" to switch
,
the language.
4. Communication setting
USB connection: click connection in the connect set dialog box, select Serial Comm
select the corresponding serial number, Baud rate is set to "115200", click "OK".
74