Product Overview; Unpacking Inspection; Name Plate; Type Designation Key - HBD PV500-0007M1 User Manual

PV500 series solar pumping inverters

2 Product overview

2.1 Unpacking inspection

Check as follows after receiving products:
1. Check that there are no damage and humidification to the package. If not, please
contact with local agents or Our offices.
2. Check the information on the type designation label on the outside of the package to
verify that the drive is of the correct type. If not, please contact with local dealers or Our
offices.
3. Check that there are no signs of water in the package and no signs of damage or breach
to the inverter. If not, please contact with local dealers or Our offices.
4. Check the information on the type designation label on the outside of the package to
verify that the name plate is of the correct type. If not, please contact with local dealers or
Our offices.
5. Check to ensure the accessories (including user's manual and control keypad) inside
the device is complete. If not, please contact with local dealers or Our offices.

2.2 Name plate

Note: This is the example of PV500 standard products and the CE\TUV\IP20 certifications are
marked according to the reality.

2.3 Type designation key

The type designation contains information on the inverter. The user can find the type
designation on the type designation label attached to the inverter or the simple name plate.
Figure 2-1 Name plate
PV500 – 0055 – G1
① ② ③
-5-
Product overview