Keypad Operation Procedure; Keypad Introduction - HBD PV500-0007M1 User Manual

PV500 series solar pumping inverters

Keypad operation procedure

4 Keypad operation procedure

4.1 Keypad introduction

Keypads are used to control PV500 series inverters, read the state data and adjust
parameters. If external keypads are needed, select keypad extension wires.
Figure 4-1 Keypad diagram for inverters
Note: External keypads can be configured for inverters ≤ 2.2kW. The keypads of inverters ≥
4kW can be used as external keypads.
The keypad displaying state of PV500 series inverters is divided into stopping state
parameter, running state parameter, function code parameter editing state and fault alarm
state and so on.
-20-