HBD PV500-0007M1 User Manual page 59

PV500 series solar pumping inverters
Function
code
PV undervoltage
P15.39
P17 Group State viewing
P17.38
Current of the
Name Detailed illustration of parameters
preset voltage, the system reports the
point
PV undervoltage (UV) fault.
The default value depends on the model
.
Model
-G1
-G2
-G3
Setting range: 0.0~400.0
This function code is provided for users
to change models. For example, if the
user wants to use model -4 (default after
factory delivery) as model -2, P15.39
must be set to 2.
0: -G1 220V; single-phase input; single-
Model
phase output
1: -G2 220V; single-phase input; three-
phase output
2: -G3 380V; three-phase input; three-
phase output
Setting range: 0~3
It is the current of the main winding when
PV UV point
140V
140V
240V
-57-
Function parameters
Default Modify
◎
0
●
0.0A