HBD PV500-0007M1 User Manual page 60

PV500 series solar pumping inverters
Function
code
main winding
Current of the
P17.39
secondary winding
P18 Group State viewing special for solar converters
PV reference
P18.00
Current PV
P18.01
Display of MPPT
min. reference
P18.02
Current inductive
P18.04
P18.07 PV input power
Previous PV input
P18.08
Previous PV
P18.09
P18.10 configuration
Name Detailed illustration of parameters
applying capacitance-removing to control
the single phase motor.
0.00~100.00A
It is the current of the secondary winding
when applying capacitance-removing to
control the single phase motor.
0.00~100.00A
MPPT is implemented at the converter
side. This value is determined at the
voltage
converter side.
It is transferred from the boost module or
voltage equal to the bus voltage.
The value displays the minimum voltage
reference during maximum power
tracking. It equals the solar cell panel
voltage
open-circuit voltage multiplied P15.26.
It is transferred from the boost module.
This function code is valid only in AC
current
mode and invalid in PV mode.
Reserved. Unit: kW
Reserved
power
Reserved
voltage
0x00~0x11
Device
Ones on LED
display
0: PV power supply
-58-
Function parameters
Default Modify
●
0.0A
●
●
●
●
●
●
●
●