HBD PV500-0007M1 User Manual page 33

PV500 series solar pumping inverters
Function
code
Operation
P01.18
protection
Restart after
P01.21
P02 Group Motor 1 parameters
P02.00 Motor type
Rated power of
P02.01 asynchronous
Rated frequency
P02.02
of asynchronous
Rated rotating
P02.03
asynchronous
Rated voltage of
P02.04 asynchronous
Name Detailed illustration of parameters
becomes valid, the inverter ceases the
output immediately. And the load coasts to
stop at the mechanical inertia.
0: The terminal running command is
invalid when powering on.
1: The terminal running command is valid
when powering on.
0: Disabled
power off 1: Enabled
0: Asynchronous motor
1: Reserved
0.1~3000.0kW
motor
0.01Hz~P00.03
motor
speed of
1~36000rpm
motor
0~1200V
motor
Set the parameter of
the asynchronous
motor.
In order to ensure the
controlling
performance, set the
P02.01~P02.05
according to the name
plate of the
asynchronous motor.
PV500 series
inverters provide the
function of parameter
autotuning. Correct
-31-
Function parameters
Default Modify
○
1
○
1
◎
0
Depend
◎
on model
50.00
◎
Hz
Depend
◎
on model
Depend
◎
on model