HBD PV500-0007M1 User Manual page 13

PV500 series solar pumping inverters
Built-in Protection
Application Site
Altitude
Environment Temperature
Humidity
Vibration
Storage Temperature
Efficiency
Installation
Protection Grade
Cooling
Lighting Protection, over-current, overvoltage, output phase-
lose, under-load, under-voltage, short circuit, overheating,
water pump run dry etc.
General Parameters
No direct sunshine, no dust、corrosive gas、combustible
gas、oil mist、steam、dripping or salinity etc.
0～2000 m
Derated use above 1000m,per 100m, the rated output
current decrease 1%.
-10℃～40℃ (Environment Temperature be 40℃～50℃,
please keep derated use.)
5～95%,non-condensation
less than 5.9 m/s 2
（0.6g）
-20℃～+70℃
Rated Power Run≥93%
Wall or rail mounting
IP20
Forced Air Cooling
-11-
Product overview