HBD PV500-0007M1 User Manual page 54

PV500 series solar pumping inverters
Function
code
Wake-up delay in
P15.15
full water state
P15.16 Empty-water delay
Wake-up delay in
P15.17
empty-water state
Hydraulic probe
P15.18
Delay time of weak
P15.23
Name Detailed illustration of parameters
function code is still valid when the digital
indicates the full-water signal.)
0~10000s
Time setting of wake-up delay in
full-water state (This function code is still
valid when the digital indicates the
full-water signal.)
0~10000s
Time setting of empty-water delay (This
function code is still valid when the digital
indicates the empty-water signal.)
0~10000s
Time setting of wake-up delay in
empty-water state (This function code is
still valid when the digital indicates the
empty-water signal.)
0.0~100.0%
0.0%: Invalid. If it is not 0.0%, when the
damage
signal is longer than P15.18, it will report
tSF fault directly and stop.
0.0~3600.0s
Delay time of weak light
If the output frequency is less than or
equal to the lower limit of PI output
light
frequency and the state lasts for the set
value, it will report A-LS and sleep. If the
state is not continuous, the delay
counting will be cleared automatically.
-52-
Function parameters
Default Modify
○
20s
○
5s
○
20s
◎
0.0%
○
100.0s