Defining Static Route Entries - ADC 410F User Manual

Defining Static Route Entries

You can enter up to 32 static routing IP addresses that the modem recognizes in the routing
address tables, in addition to the routing IP addresses that the modem learns.
page 71 for more information on defining static route entries
1 Enter static routes.
‹
Enter the
Œ
Enter the

All static route entries are listed in this table after you enter the parameters in
‹
fields
2 Click Add to accept this entry.
3 To delete a Static Route Entry
a Click the entry in the list shown in field
Static Route Entry
b Click Delete
4 Click Done when you complete all configuration additions and deletions.
Megabit Modem 410F and 420F User Manual
192.168.30.0
192.168.10.2
Destination IP address and
Gateway IP address to the next hop.
Œ
and .
:
‹ Œ
fields and
to remove the entry.
.)
255.255.255.0
net mask destination

above to select it. The entry displays in the
.
Chapter 6: Configuring the Ports
( See "Routing" on
‹
Œ

.
51