Table of Contents
Advertisement
Setting Up the PC
S
U
ETTING
P THE
To access the modem Web interface, set up your PC on the same LAN IP subnet as the
MM701G. The default LAN IP subnet for the modem is 10.0.0.0 with a subnet mask of
255.255.255.0.
However, if you have an existing subnet to accommodate the modem, change the IP address of
the modem from the command-line interface as described
If your PC cannot connect to the modem, set your PC Ethernet NIC card for 10 Mbps
half-duplex transmission (not auto-detect).
The following is an example of how to set up a PC running Microsoft Windows 98.
1
From the Windows desktop, click
the
Control Panel
2
From the
Control Panel
3
From the
Configuration
10
PC
Start
dialog.
dialog, double-click the
tab, double-click
in"Setting Up the LAN" on page
,
Settings
,
Control Panel
icon.
Network
TCP/IP
.
to open
MM701G User Manual
48.
Advertisement
Table of Contents
