Nortel 1000 Manual page 59

Fiber-optic equipment installation 59
From Fiber Superloop Network #1, an RJ-11 cable can be extended to the
lowest slave system monitor J6 connector in the pedestal. This connection
makes the three Fiber Superloop Network cards the lowest slave system
monitors in the chain where Fiber Superloop Network card #3 is the
lowest.
The Fiber Remote IPE alarms are received over the link and through the
Fiber Superloop Network cards to the system monitor J6 connector.
Figure 11
System monitor connections at the local site and the Fiber Remote IPE
Nortel Communication Server 1000
Fiber Remote IPE Fundamentals
NN43021-554 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.