Functional Architecture - Nortel 1000 Manual

20 Product description
Figure 3
Wall-mounted Remote IPE cabinet

Functional architecture

Fiber Remote IPE functions are controlled by the local system CPU
and the firmware in the Fiber Superloop Network and Fiber Peripheral
Controller cards. The CPU uses software instructions to execute call
processing, administration, and diagnostic functions. These functions can
be divided into three basic categories:
•
CPU functions
•
Network functions
•
IPE functions
Figure 4 "Functional architecture" (page 21)
functional architecture in a broad block diagram to show the three basic
types of functions and system modules supporting these functions.
Nortel Communication Server 1000
Fiber Remote IPE Fundamentals
NN43021-554 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
illustrates the system