Bypass Mode
The
indicating Bypass mode (see Figure 18). When the UPS is in Bypass
mode, the load is powered by utility power. However, utility power
continues to be passively filtered by the UPS.
Battery Mode
When the UPS is operating during a power outage, the alarm beeps
several times initially, and then once every 10 seconds while in Battery
mode. The
approximate percentage of battery capacity remaining (see Figure 19).
When the utility power returns, the UPS switches to Normal mode
operation while the battery recharges.
If battery capacity becomes low while in Battery mode, the I3 indicator
begins to flash and the Output On indicator remains lit, indicating
approximately two minutes before UPS shutdown. The alarm beeps
every two seconds.
Avaya Model 3000 UPS Operator's Manual
µ
i ndicator and the
Figure 18. Bypass Operation Indicators
indicator illuminates. The front panel displays the
OVERLOAD
I1
I2
I3
OUTPUT ON
BATTERY
ONLINE
>75%
CAPACITY
REMAINS
Figure 19. Battery Operation Indicators
167-405-119 Issue 6 Uncontrolled Copy
S
indicator illuminate simultaneously,
OVERLOAD
I1
I2
I3
OUTPUT ON
LOAD ON
UNIT ON
BYPASS
BATTERY
BATTERY
BATTERY
ONLINE
ONLINE
ONLINE
>50%
>25%
LOW
CAPACITY
CAPACITY
BATTERY
REMAINS
REMAINS
WARNING
UPS Operation
BATTERY
ONLINE
SHUTDOWN
IMMINENT
45