Security; Routing - Nortel BSR252 Configuration - Basics

74 Chapter 4 User Notes
7

Security

1
To export or save a self-signed certificate, click details (the icon that looks like a
paper note), then click 'Export' or copy the PEM text into the clipboard, and paste
into a file.

Routing

1
To change the version of generated RIP advertisements, the following CLI
command needs to be used
where:
The number controls the operating mode:
NN47923-500
VPN Clients can have dynamically assigned IP addresses, or they can have a
statically assigned addresses. However, the router does not support both
modes at once. All addresses must either be dynamically assigned, or they
must all be statically assigned.
VPN Client Termination - Saving Advanced Changes
When changes to the VPN Client Termination Advanced Configuration page
are made, 'Apply' must be clicked to temporarily save these changes. To
permanently save the changes, 'Apply' must then be clicked on the VPN
Client Termination main page.
Exporting or Saving Self-Signed Certificate
RIP Version Advertisement Control
ip rip mode [enif0|enif1] [in|out] [0|1|2|3]
'enif0' is the LAN side, and 'enif1' is the WAN side
'in' affects recognition of received advertisements, and
'out' applies to generated advertisements
None (disabled)
RIP-1 only