Configuring Dial Backup; Figure 30 Traffic Redirect; Table 20 Traffic Redirect - Nortel BSR252 Configuration - Basics

Figure 30 Traffic Redirect

Table 20

Table 20 Traffic Redirect

Label
Active
Backup
Gateway IP
Address
Apply
Reset

Configuring Dial Backup

To change the dial backup settings, click WAN, then the Dial Backup tab. The
screen appears as shown in
describes the fields in
Description
Select this check box to have the Business Secure Router use traffic
redirect if the normal WAN connection goes down.
Type the IP address of your backup gateway in dotted decimal
notation. The Business Secure Router automatically forwards traffic to
this IP address if the Business Secure Router's Internet connection
terminates.
Click Apply to save your changes back to the Business Secure Router.
Click Reset to begin configuring this screen afresh.
Figure
Nortel Business Secure Router 252 Configuration — Basics
Chapter 7 WAN screens 119
Figure 30.
31.