DHCP setup
Using Dynamic Host Configuration Protocol (DHCP), individual clients can
obtain TCP/IP configuration from a server. You can configure the Business
Secure Router as a DHCP server. When configured as a server, the Business
Secure Router provides the TCP/IP configuration for the clients. If you turn
DHCP service off, you must have another DHCP server on your LAN, or else the
computer must be manually configured. DHCP (Dynamic Host Configuration
Protocol, RFC 2131 and RFC 2132)
IP pool setup
The Business Secure Router is preconfigured with a pool of IP addresses for the
client machines.
Wizard setup configuration: third screen
1
Verify the settings in the following screen. To change the LAN information
on the Business Secure Router, click Change LAN Configurations.
Otherwise click Save Settings to save the configuration and skip to
your Internet connection" on page
Nortel Business Secure Router 252 Configuration — Basics
Chapter 3 Wizard setup 65
69.
"Test