Configuring Route Entry; Figure 44 Edit Ip Static Route; Table 31 Edit Ip Static Route - Nortel BSR252 Configuration - Basics

150 Chapter 9 Static Route screens

Configuring Route entry

Select a static route index number and click Edit. The screen is illustrated in
Figure

Figure 44 Edit IP Static Route

Table 31

Table 31 Edit IP Static Route

Label
Route Name
Active
Destination IP
Address
IP Subnet Mask
Gateway IP
Address
NN47923-500
44. Fill in the required information for each static route.
describes the fields in
Description
Enter the name of the IP static route. Leave this field blank to delete
this static route.
This field allows you to activate or deactivate this static route.
This parameter specifies the IP network address of the final
destination. Routing is always based on network number. If you need
to specify a route to a single host, use a subnet mask of
255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.
Enter the IP subnet mask here.
Enter the IP address of the gateway. The gateway is a router or
switch on the same network segment as the Business Secure Router
LAN or WAN port. The gateway helps forward packets to their
destinations.
Figure 44.