Nortel BSR252 Configuration - Basics page 327

Table 88 RADIUS
Label Description
Port Number The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Key Enter a password (up to 31 alphanumeric characters) as the key to
be shared between the external authentication server and the
Business Secure Router.
Note that, as you type a password, the screen displays an * for each
character you type.
The key is not sent over the network. This key must be the same on
the external authentication server and Business Secure Router.
Retype to Confirm Enter the password again to make sure that you have entered it
correctly.
Accounting Server
Active Select the check box to enable user accounting through an external
authentication server.
Server IP Address Enter the IP address of the external accounting server in dotted
decimal notation.
Port Number The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Key Enter a password (up to 31 alphanumeric characters) as the key to
be shared between the external accounting server and the Business
Secure Router.
Note that as you type a password, the screen displays a (*) for each
character you type.
The key is not sent over the network. This key must be the same on
the external accounting server and Business Secure Router.
Retype to Confirm Enter the password again to make sure that you have entered it
correctly.
Apply Click Apply to save your changes to the Business Secure Router.
Reset Click Reset to begin configuring this screen afresh.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 17 Authentication server 327