Figure 134 Configuring Upnp; Table 97 Configuring Upnp - Nortel BSR252 Configuration - Basics

Figure 134 Configuring UPnP

Table 97 describes the fields in

Table 97 Configuring UPnP

Label
Device Name
Enable the Universal Plug
and Play (UPnP) feature
Allow users to make
configuration changes
through UPnP
Allow UPnP to pass through
firewall
Apply
Reset
Figure 134.
Description
This identifies the device in UPnP applications.
Select this check box to activate UPnP. Be aware that
anyone can use a UPnP application to open the WebGUI's
logon screen without entering the Business Secure
Router's IP address (although you must still enter the
password to access the WebGUI).
Select this check box to allow UPnP-enabled applications
to automatically configure the Business Secure Router so
that they can communicate through the Business Secure
Router. For example, by using NAT traversal, UPnP
applications automatically reserve a NAT forwarding port
in order to communicate with another UPnP enabled
device; eliminating the need to manually configure port
forwarding for the UPnP enabled application.
Select this check box to allow traffic from UPnP-enabled
applications to bypass the firewall.
Clear this check box to have the firewall block all UPnP
application packets (for example, MSN packets).
Click Apply to save your customized settings and exit this
screen.
Click Reset to begin configuring this screen afresh.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 19 UPnP 363