Table of Contents
Advertisement
338 Chapter 18 Remote management screens
Use this procedure to have the Business Secure Router use a certificate with a
common name that matches the actual IP address of the Business Secure Router.
You cannot use this procedure if you need to access the WAN port and it uses a
dynamically assigned IP address.
Logon screen
After you accept the certificate, the Business Secure Router logon screen appears.
The lock displayed in the bottom right of the browser status bar denotes a secure
connection.
NN47923-500
a
Click REMOTE MGMT. Write down the name of the certificate
displayed in the Server Certificate field.
b Click CERTIFICATES. Find the certificate that was displayed in the
Server Certificate field and check its Subject column. CN stands for the
common name of the certificate (see
example).
a
Create a new certificate for the Business Secure Router that uses the IP
address (of the Business Secure Router port that you are trying to access)
as the common name of the certificate. For example, to use HTTPS to
access a LAN port with IP address 192.168.1.1, create a certificate that
uses 192.168.1.1 as the common name.
b Go to the remote management WWW screen and select the newly created
certificate in the Server Certificate field. Click Apply.
Figure 118 on page 342
for an
Advertisement
Table of Contents
Troubleshooting
