Configuring Log Settings - Nortel BSR252 Configuration - Basics

Table 99 View Log
Label
Refresh
Clear Log

Configuring Log settings

To change your Business Secure Router log settings, click Logs, then the Log
Settings tab. The screen appears as shown in
Use the Log Settings screen to configure to where the Business Secure Router
sends logs; the schedule for when the Business Secure Router is to send the logs
and which logs and immediate alerts the Business Secure Router is to send.
An alert is a type of log that warrants more serious attention including system
errors, attacks (access control), and attempted access to blocked Web sites or Web
sites with restricted Web features such as cookies or Active X. Some categories,
such as System Errors, consist of both logs and alerts. You can differentiate
between logs and alerts by their color in the View Log screen. Alerts display in
red and logs display in black.
Description
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
Note: Alerts are e-mailed as soon as they happen. Logs can be e-mailed
as soon as the log is full. Selecting many alert and log categories
(especially Access Control) can result in many e-mails being sent.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 20 Logs Screens 375
Figure 150.