Nortel BSR252 Configuration - Basics page 444

Business secure router
Hide thumbs Also See for BSR252:
Table of Contents

Advertisement

444 Appendix B Log Descriptions
Table 132 Sample IKE Key Exchange Logs
Log Message
!! Remote IP <IP start> /
<IP end> conflicts
!! Active connection
allowed exceeded
!! IKE Packet Retransmit
!! Failed to send IKE
Packet
!! Too many errors!
Deleting SA
!! Phase 1 ID type
mismatch
!! Phase 1 ID content
mismatch
!! No known phase 1 ID
type found
Peer ID: IP address type
<IP address>
vs. My Remote <IP
address>
vs. My Local <IP address> The IP address type or IP address of an incoming
NN47923-500
Description
If the security gateway is "0.0.0.0", the Business
Secure Router uses the peer "Local Addr" as its
"Remote Addr". If a peer "Local Addr" range conflicts
with other connections, the Business Secure Router
does not accept VPN connection requests from this
peer.
The Business Secure Router limits the number of
simultaneous Phase 2 SA negotiations. The IKE key
exchange process fails if this limit is exceeded.
The Business Secure Router did not receive a
response from the peer and retransmits the last
packet sent.
The Business Secure Router cannot send IKE
packets due to a network error.
The Business Secure Router deletes an SA when
too many errors occur.
The ID type of an incoming packet does not match
the local's peer ID type.
The ID content of an incoming packet does not
match the local's peer ID content.
The ID type of an incoming packet does not match
any known ID type.
The IP address type or IP address of an incoming
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays the IP address type and IP address of the
incoming packet.
The IP address type or IP address of an incoming
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays the configured remote IP address type or IP
address for this router that the incoming packet did
not match.
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays the configured local IP address type or IP
address that the incoming packet did not match.

Advertisement

Table of Contents
loading

Table of Contents