J Nozzle Options - Kasco 3.1EVX Owner's Manual

J Nozzle Options

NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
The Redwood nozzle uses the 3 self tapping screws to
attach over the pump housing and the Y Insert must be
installed.
Model HP
8400, 2.3 2
3.1, 3.3 3
The Linden nozzle (marked L inside one of the fi ns)
uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
5.3 5
8
Height Width
5.5 m 1.5 m
6.1 m 0.9 m
Height Width
4.7 m 10.4 m
4.1 m 9.8 m
4.9 m 8.5 m
The Willow nozzle (marked W on the inside of the
cone) uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
The Juniper nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
The Spruce nozzle uses the three self tapping screws
to attach over the pump housing and the Y Insert must
be removed.
Model HP
8400, 2.3 2
3.1, 3.3 3
Height Width
3.4 m 10.4 m
3.6 m 8.2 m
Height Width
1.8 m 13.4 m
2.7 m 12.2 m
Height Width
5.5 m 3 m
5.8 m 2.1 m