THANKS PFD. (Personal Flotation Device) We at Kasco Marine, Inc. would like to both thank and • The fountain is supplied with an internal ground- congratulate you on your purchase of the JF model ing conductor and a grounding-type attachment aerating fountain.
3400JF model Fountain with a 2 Year War- on a shelf for many months, or even years have a ranty. This warranty covers any and all manufacturers greater likelihood of seals drying out. Storing upside defects within 2 years from the date of purchase (See down will ensure oil is lubricating the seals and pre- Warranty &...
3400JF, 3400HJF Parts Included Set of 5 Interchangeable Nozzles (5) Item Part # Item Part# 3/8” x 2.25” Bolt 820097 1 3400JF Aerator 3/8” x 4” bolt 820090 1 Float 242001 Linden Nozzle 820111 1/4-20 x 3 1/2” Phillips Pan Head...
3400JF, 3400HJF Assembly 1. Rest the float on the 4 legs of the housing. Align power Align bolt holes cord with notch with legs 2. Lock washer goes between bolt and flat washer. Tighten down in 4 places 3. Turn over. Bring...
Page 6
5. Turn upright. Secure power cord to rope hole With Strain Relief Without Strain Relief 6. Choose Nozzle. Fit bolt into the molded socket on the nozzle and thread into the inner cone of the pump. 7. Thread one rope through one weighted tube rope Weight and position it approximately 6’...
4400JF, 4400HJF Parts Included Set of 5 Interchangeable Nozzles (5) Item Part # Item Part# 3/8” x 2.25” Bolt 820097 1 4400JF Aerator 3/8” x 4” bolt 820090 1 Float 242001 Linden Nozzle 820111 1/4-20 x 4” PhilPan Head Screw 251220 Sequoia Nozzle 820130 1...
4400JF, 4400HJF Assembly 2. Lock washer goes between bolt and flat washer. Tighten 1. Rest the float on down in 4 places to the Cage the float retaining clips Align power cord with notch Secure to top ring of cage 3.
Page 9
5. Turn upright. Secure power cord to rope hole Without Strain Relief With Strain Relief 6. Choose Nozzle. Fit bolt into the molded socket on the nozzle and thread into the inner cone of the pump. 7. If ready to install in the pond, go to Installation instructions. Light Kits can also be installed at this time, go to Light kit instructions.
The Sequoia nozzle uses the shorter 3/8” x 2.25” bolt. To install, simply drop the bolt through the nozzle and Model Height Width thread into the top of the cone on the fountain. 3400JF/HJF 4.5’ 15’ 4400JF/HJF 6’ 23’ Cypress Display: The Cypress nozzle (marked C1 on fin) makes use of the collar (marked C2 on the top rim) and the 3/8”...
“UNIT”. If lights are included, plug the Transformer cord into the C-25 outlet labeled “LIGHT”. Now you are ready to plug the C-25 into the 120V power supply on the post and ENJOY YOUR NEW KASCO AERA- TOR! STEP THREE (For 240V Installation)
Page 12
Any unauthorized modifications to this control panel will void the UL listing and the Kasco warranty. Light Kit connection: If you purchased a Kasco light kit(s) for your aerator, follow the light kit installation instructions for mounting the light kit(s) to the aerator float.
DOES POP OUT, OR IF THE G.F.C.I. FAILS TO RE- SET PROPERLY, DO NOT USE TIMER! CONTACT A QUALIFIED SERVICE TECHNICIAN! Failure to use the C-25 with Kasco Fountains will void the warranty and cause the Fountain to not be listed to UL and CSA standards via ETL.
Page 15
C85 / C95 non-metallic Control Panel minutes for each tripper on the 24-Hour dial. When the tripper is pushed to the inside, the switch is in the Timer “OFF” position. TIME CLOCK SETTING PROGRAMMING WITH MANUAL OVERRIDE SWITCH To set the current time, turn the inner dial clockwise. Your Timer may have a 3-way manual switch or a Do not set the time by rotating “outer”...
The Kasco Marine, Inc. obligation Kasco Marine will have a record of the purchase and under this warranty is limited to replacing or repairing will be able to determine whether or not the unit still free of charge any defective part within the warranty caries warranty coverage.
Any expedited shipping method for the return of the problem occurs, please double check the assembly and unit is at the customer’s expense. Kasco Marine will installation instructions as well as the instructions for return units repaired under warranty at our expense via the proper control panel.
Page 19
Contact a Kasco representative before restart- ing the unit. “My Fountain flow seems to fluctuate and/or be less than usual.”...
Customer Repair Form 800 Deere Rd Prescott, WI 54021 Phone: 715‐262‐4488 Fax: 715‐262‐4487 www.Kascomarine.com Sales@kascomarine.com Repair Contact Form Kasco requires all Repairs sent in MUST be accompanied by this form and marked to Repairs attention. (ex. Attn: Repairs) Repairs returned should include upper pump housing or wire basket for Aerators and De‐Icers. These parts protect the motor during shipping. Kasco is NOT responsible for shipping damage accrued in return shipment. It is the responsibility of customer to ship and pay freight to Kasco. Do not ship float or control panel with unit, unless otherwise instructed A fee of $60 per hour will be assessed for cleaning excessively dirty units and float disassembly Refer to the Owner’s manual for easy‐to‐follow troubleshooting rule out site issue. Note: Contact Information Should be that of the person or company to contact for repair. Company First Name Last Name Address City State ...
Registration Information Fill in the information below and keep for your records. Model # (Ex. 3400JF)_______________________________ Serial # (Ex. 5101J341725)______________________________ Purchase Date:_____________________ Purchased From:___________________________________ Registration Date: ___________________________ Kasco Marine, Inc. 800 Deere Rd. Prescott, WI 54021 Phone (715) 262-4488 • Fax (715) 262-4487 www.kascomarine.com •...