Nozzle Options - Kasco 3400JF Owner's Manual

Nozzle Options

NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
• The Cypress is the only nozzle that uses the sepa-
rate collar labeled C2.
• The Cypress, Linden, Willow, and Juniper nozzles
use the 3/8" x 4" bolt.
• The Sequoia nozzle uses the shorter 3/8" x 2.25"
bolt.
To install, simply drop the bolt through the nozzle and
thread into the top of the cone on the fountain.
Cypress Display:
The Cypress nozzle (marked C1 on fin) makes use of
the collar (marked C2 on the top rim) and the 3/8" x
4" bolt.
Model
3400JF/HJF
4400JF/HJF
Linden Display:
The Linden nozzle (marked L inside one of the fins)
uses the 3/8" x 4" bolt.
Model
3400JF/HJF
4400JF/HJF
10
Height Width
6' 16'
7.5' 25'
Height Width
6' 18'
8' 25'
Willow Display:
The Willow nozzle (marked W on the inside of the
cone) uses the 3/8" x 4" bolt.
Model
3400JF/HJF
4400JF/HJF
Juniper Display:
The Juniper nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8" x 4" bolt.
Model
3400JF/HJF
4400JF/HJF
Sequoia Display:
The Sequoia nozzle is not marked and uses the shorter
3/8" x 2.25"
Model
3400JF/HJF
4400JF/HJF
Height Width
4.5' 15'
6' 23'
Height Width
3' 20'
4' 27'
Height Width
7' 4'
9.5' 6'