Nozzle Options; Installation Instructions - Kasco J Series Owner's Manual

Nozzle Options

NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
To install, place oring around outlet and simply twist
the nozzle into the 3 locking tabs.
Sequoia Display:
The Sequoia nozzle (marked S on the part)
Model
3400JF/HJF
4400JF/HJF
Linden Display:
The Linden nozzle (2 piece assembly with bolt)
DO NOT SCALE DRAWING
C.A.D. GENERATED DRAWING
THIS DOCUMENT HAS BEEN ISSUED
FOR ENGINEERING INFORMATIONAL
PURPOSES ONLY. ANY REVISIONS
TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
ORIGINAL CAD FILE.
DO NOT SCALE DRAWING
Model
C.A.D. GENERATED DRAWING
THIRD ANGLE PROJECTION
THIS DOCUMENT HAS BEEN ISSUED
FOR ENGINEERING INFORMATIONAL
3400JF/HJF
PURPOSES ONLY. ANY REVISIONS
TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
ORIGINAL CAD FILE.
4400JF/HJF
THIRD ANGLE PROJECTION
Cypress Display:
The Cypress nozzle (marked C on part)
DO NOT SCALE DRAWING
C.A.D. GENERATED DRAWING
THIS DOCUMENT HAS BEEN ISSUED
FOR ENGINEERING INFORMATIONAL
PURPOSES ONLY. ANY REVISIONS
TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
ORIGINAL CAD FILE.
THIRD ANGLE PROJECTION
8
Height
13'
18'
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
DIMENSIONS IN [ ] ARE MILLIMETERS.
TOLERANCES ON:
.X .02 [.508] .XX .010 [.254]
.XXX .005 [.127] ANGULAR 0.5
MATERIAL:
THIS DRAWING CONTAINS PROPRIETARY Height
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES. VALOX 357
INFORMATION AND SHALL NOT BE USED,
DIMENSIONS IN [ ] ARE MILLIMETERS.
BLACK
REPRODUCED OR DISTRIBUTED WITHOUT
TOLERANCES ON:
THE PRIOR WRITTEN CONSENT OF 9'
FINISH:
.X .02 [.508] .XX .010 [.254]
KASCO MARINE, INCORPORATED
CLEAN
.XXX .005 [.127] ANGULAR 0.5
FREE OF FLASH
12'
THIS DRAWING CONTAINS PROPRIETARY
INFORMATION AND SHALL NOT BE USED,
REPRODUCED OR DISTRIBUTED WITHOUT
THE PRIOR WRITTEN CONSENT OF
KASCO MARINE, INCORPORATED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
DIMENSIONS IN [ ] ARE MILLIMETERS.
TOLERANCES ON:
.X .02 [.508] .XX .010 [.254]
.XXX .005 [.127] ANGULAR 0.5
THIS DRAWING CONTAINS PROPRIETARY
INFORMATION AND SHALL NOT BE USED,
REPRODUCED OR DISTRIBUTED WITHOUT
THE PRIOR WRITTEN CONSENT OF
KASCO MARINE, INCORPORATED
Model
3400JF/HJF
4400JF/HJF
Birch Display:
The Birch nozzle (marked B on the part)
DWG. NO.
Model
3400JF/HJF
4400JF/HJF
Willow Display:
No nozzle installed
Width
8'
11'
Model
3400JF/HJF
DO NOT SCALE DRAWING
C.A.D. GENERATED DRAWING
MATERIAL:
4400JF/HJF
AS NOTED ABOVE THIS DOCUMENT HAS BEEN ISSUED
FOR ENGINEERING INFORMATIONAL
X
PURPOSES ONLY. ANY REVISIONS
FINISH: TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
NONE
ORIGINAL CAD FILE.
X
Width
THIRD ANGLE PROJECTION
TITLE:
3400J SERVICE PRINT
29'
X
800 DEERE ROAD
PRESCOTT, WI 54021-1241
Use the ropes to position the Fountain in the desired
31'
TITLE:
SCALE: 1:2
NOZZLE, SEQUOIA location in the pond/lake. Anchor the ropes or secure
3400J 4400J
them to the shoreline so the ropes are free of slack, but
not tight. To prevent twisting of the unit due to torque,
you should place the anchor at least 3 feet from the
float for each foot of depth (Ex. A 6 foot deep pond
would require an anchor 18 feet horizontally from the
float.)
MATERIAL:
AS NOTED ABOVE
X
FINISH:
NONE
X
TITLE:
3400J SERVICE PRINT
X
Height
7'
9'
431230
3400J SERVICE
DWG. NO.
Height
7'
11'
Height
6.5'
UNLESS OTHERWISE SPECIFIED
9'
DIMENSIONS ARE IN INCHES.
DIMENSIONS IN [ ] ARE MILLIMETERS.
TOLERANCES ON:
.X .02 [.508] .XX
800 DEERE ROAD .XXX .005 [.127] ANGULAR
3400J SERVICE
PRESCOTT, WI 54021-1241
THIS DRAWING CONTAINS PROPRIETARY
DWG. NO.
INFORMATION AND SHALL NOT BE USED,
SCALE: 1:20 SHEET 1 OF 1
REPRODUCED OR DISTRIBUTED WITHOUT
THE PRIOR WRITTEN CONSENT OF
3400J SERVICE

Installation Instructions

KASCO MARINE, INCORPORATED
SHEET 1 OF 1
431230
800 DEERE ROAD
PRESCOTT, WI 54021-1241
SCALE: 1:20 SHEET 1 OF 1
3400J SERVICE
Width
17'
28'
Width
5'
8'
Width
21'
MATERIAL:
31'
AS NOTED ABOVE
X
FINISH:
.010 [.254]
NONE
0.5
X
TITLE:
3400J SERVICE PRINT
X