Connection Single-Phase Units 3400JF 110-120 C-25 plug in Plug into C-25 3400HJF 208-240 Hardwire C-85 Hardwire into C-85 4400JF 110-120 C-25 plug in Plug into C-25 4400HJF 208-240 Hardwire C-85 Hardwire into C-85 3400 - 4400 J SERIES FOUNTAIN MANUAL...
31’ Sequoia Linden Cypress Willow Birch Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or voltage drop due to long power cords may result in reduced pattern sizes. 3400 - 4400 J SERIES FOUNTAIN MANUAL...
Premium nozzles are not included as standard but may be added and installed at any time. These nozzles offer unique patterns that truly showcase your pond or lake. Contact Kasco Marine at sales@kascomarine.com or your local distributor for order information.
Page 7
Back to Contents ASSEMBLY INSTRUCTIONS Align power cord with this notch. 3400 - 4400 J SERIES FOUNTAIN MANUAL...
Push the nozzle into the cone and twist to lock the 3 tabs into the nozzle plate. Premium Nozzle Installation Twist the nozzle into place and insert the quick release pin into one of the holes in the nozzle base plate. Quick release pin 3400 - 4400 J SERIES FOUNTAIN MANUAL...
(at least 3 feet from the float for every foot of water depth). Alternate Installation Anchor rope Secondary weight Normal water level Low water level High water level 3400 - 4400 J SERIES FOUNTAIN MANUAL...
Sacrificial Anode All Kasco units include a sacrificial anode installed on the shaft to protect against corrosion and electrolysis. Replace the anode if it is reduced to half the original size or if it is white in color. Corrosion from electrolysis most commonly occurs in saltwater or brackish water, but it is important to check the anode in all installations at least every two to three months.
Check that the unit is receiving the proper voltage, and contact Kasco for further steps. Note: If the equipment has been stored or exposed to cold for an extended period without running, it may take some time for the prop to reach full speed once power is supplied.
Please ship according to the instructions on the previous provided. Kasco Marine does estimates on repairs at the request of the customer. The request for estimate should be included in the letter that accompanies the returned unit and must include a daytime phone number and/ or e-mail address.
Back to Contents REPAIR CONTACT FORM • Kasco requires that all equipment sent for repair MUST be accompanied by this form and marked to Repairs attention. Kasco Marine • Unit should be cleaned before shipping. 800 Deere Road • Kasco is NOT responsible for shipping damage accrued in Prescott, WI 54021 return shipment.