Sound-Controlled Mode; Static Control Mode - SHOWTEC Dynamic LED V4 Manual

Dynamic LED

5. Sound-controlled Mode

With this menu you can set the Sound-controlled programs.
01) Press the Mode button until the display shows
02) Press the Setup button to open the submenu, you can choose between 2 options:
03) Hold the Up or Down button for 3 seconds to switch between program 1 or program 2.
04) Press the Up and Down buttons to set the sensitivity from the two sound programs, between 100-131,
from less sensitivity to maximum sensitivity.
05) Turn on the music and the Dynamic LED will immediately start the desired Sound-controlled program.

6. Static Control Mode

With this menu you can manually set a desired preset color.
01) Press the Mode button until the display shows
02) Press the Up and Down buttons to choose between the 11 preset colors:
Red, Green, Blue, White, Orange
Red
Green
Blue
Orange
White
Orange+White
Red+Green
Red+Blue
Green+Blue
Red+Green+Blue
Ordercode: 43056
Sound program 1: the LEDs will keep running for 5 seconds after the music has
been stopped
Sound program 2: the LEDs immediately stop running when the music stops
.
.
15