Control Modes; Dmx-512 Mode; Auto Slow Mode; Auto Fast Mode - SHOWTEC EventMOVE 4/4 Manual

EventMOVE 4/4

4. Control modes

01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to choose the desired control mode. There are 4 available options:

4.1. DMX-512 mode

01) When the display shows
02) Now it is possible to control the EventMOVE by means of a DMX controller.

4.2. Auto slow mode

01) When the display shows
02) The device will now run a slow auto show.

4.3. Auto fast mode

01) When the display shows
02) The device will now run a fast auto show.

4.4. Sound-controlled mode

01) When the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP/DOWN buttons to increase/decrease the sound sensitivity. The adjustment range is
between
04) The device will now react to the beat of the background music.

5. Manual mode (Static colors)

With this menu you can set the device's static colors.
01) Press the MODE button until the display shows one of the 5 following options:
Ordercode: 44020
DMX-512 mode
Auto slow mode
Auto fast mode
Sound-controlled mode
, the display is operating in DMX-512 mode.
, the device is operating in Auto slow mode.
, the device is operating in Auto slow mode.
, the device is operating in Sound-controlled mode.
.
Red
Green
Blue
White
Tilt adjustment
15
.