Related Manuals for SHOWTEC Followspot LED 120W
Summary of Contents for SHOWTEC Followspot LED 120W
- Page 1 MANUAL ENGLISH Followspot LED 120W Ordercode: 40120 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Followspot LED 120W Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Overview ..................................7 Frontside..................................8 Backside ..................................9 Installation ................................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Followspot LED 120W Tripod (875-1320 mm) ... - Page 4 • If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Followspot LED 120W Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light output and the illuminated surface must be bigger than 1 meter. - Page 6 Followspot LED 120W The Followspot can be mounted to the included tripod. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place.
-
Page 7: Return Procedure
Followspot LED 120W Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
Followspot LED 120W Description of the device Features The Followspot LED 120W is a compact spot effect with high output. Input voltage: 100-240V AC, 50/60Hz Power consumption: 190W Light source: 1 x CW (120W, 10000K) Lumen: 4000+ ... -
Page 9: Frontside
Followspot LED 120W Frontside Fig. 02 01) Manual zoom control 02) 1 x CW (120W, 10000K) 03) Manual focus control 04) Fuse F5AL/250V 05) 100-240V AC Pro power connector Blue IN 06) Mounting bracket with inclination screw 07) Adjustment screws... -
Page 10: Backside
15) Iris fader 16) Strobe fader Installation Remove all packing materials from the Followspot LED 120W. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 11: Mounting The Followspot Onto The Tripod
Followspot LED 120W Mounting the Followspot Onto the Tripod 01) Remove the mounting screw from the tripod, by turning it counterclockwise. Fig. 04 02) Place the Followspot on the tripod. Fig. 05 Ordercode: 40120... -
Page 12: Inclination Screw
Followspot LED 120W 03) Tighten the mounting screw. Fig. 06 Inclination Screw 01) Loosen the inclination screw and tilt the Followspot to the desired angle. 02) Tighten the inclination screw. Fig. 07 Ordercode: 40120... -
Page 13: Dimmer
Followspot LED 120W Dimmer Move the dimmer fader (14) to set the desired dimmer brightness. The adjustment range is from dark to brightest. Iris Move the iris fader (15) to set the iris position. The adjustment range is from OFF to full iris. -
Page 14: Maintenance
Followspot LED 120W Maintenance The operator has to make sure that safety-related and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-related and machine-technical installations are to be inspected by a skilled person once a year. -
Page 15: Troubleshooting
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Followspot to your Showtec dealer. 03) The fuse. Replace the fuse. See page 13 for replacing the fuse. -
Page 16: Product Specifications
Followspot LED 120W Product Specifications Model: Showtec Followspot LED 120W Input voltage: 100-240V AC, 50/60Hz Power consumption: 190W Fuse: F5AL/250V Dimensions (Followspot): 550 x 225 x 245 mm (LxWxH) Weight (Followspot): 10,2 kg Dimensions (tripod): 840 x 1320 mm (WxH) -
Page 17: Dimensions
Followspot LED 120W Dimensions Ordercode: 40120... -
Page 18: Notes
Followspot LED 120W Notes Ordercode: 40120... - Page 19 Followspot LED 120W Ordercode: 40120...
- Page 20 ©2017 Showtec...