Slave Mode; Sound-Controlled Mode; Static Color; Built-In Programs - SHOWTEC Compact Power Lightset MKII Manual

Compact Power Lightset MKII

3. Slave mode

With this menu you can set the device as a Slave.
01) Press the Mode button until the display shows
02) If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.

4. Sound-controlled mode

With this menu you can activate the sound-controlled mode.
01) Press the Mode button until the display shows
02) Press the Up/Down buttons to select the required sound sensitivity between
03) Turn on the music and the Compact Lightset will start the Sound-controlled program.

5. Static Color

With this menu you can set the static colors.
01) Press the Mode button until the display shows
02) Press the Setup button to enter the submenu.
03) Press the Up/Down buttons to select the required color:
Gradual adjustment Red intensity between 0-255
Gradual adjustment Green intensity between 0-255
Gradual adjustment Blue intensity between 0-255

6 Built-in Programs

With this menu you can choose a built-in program.
01) Press the Mode button, until the display shows
02) Press the Up and Down buttons to choose between 14 built-in programs.
03) If you choose
Red
Red + Green
Green
Green + Blue
Blue
Red + Blue
Red + Green + Blue
Off
04) Choose the desired color and press the Setup button to set the strobe frequency.
05) Press the Up and Down buttons to choose the strobe frequency, the adjustment range is between
06) If you choose
frequency. The adjustment range is between
Ordercode: 30268
, press the Setup button to enter the submenu:
.
, press the Setup button to set the speed, fade time or strobe
(fade) and
.
.
.
.
(strobe).
15
.
(speed),