Master/Slave Mode; Display On/Off; Sound-Controlled Mode; Code On/Off - SHOWTEC Astro 360 RGBW V1 Manual

Astro 360 RGBW

2.3. Master/Slave mode

With this menu you can set the device as a master or a slave device.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the device as a master (MAST) or a slave (SLAVE).
04) Press the ENTER button to confirm your choice.

2.4. Display ON/OFF

With this menu you can set the device as a master or a slave device.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose between:
 ON (display continuously ON)
 OFF (display OFF after 10 seconds of remaining idle)
04) Press the ENTER button to confirm your choice.

2.5. Sound-controlled mode

With this menu you can set the device as a master or a slave device.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to activate (ON) or deactivate (OFF) Sound-controlled mode.
04) Press the ENTER button to confirm your choice.
05) If you have chosen ON, the device will react to the beat of the background music.

2.6. Code ON/OFF

With this menu you can switch the code ON or OFF.
01) For proper functioning, please set the Code Menu always to ON

2.7. Manual mode

With this menu you can manually adjust the available DMX channels, corresponding with various
functions.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to activate (ON) or deactivate (OFF) Manual mode.
04) Press the ENTER button to confirm your choice.
Ordercode: 43023
15
.
.
.
.
.